Stilts
for
Dance
Specially designed light weight stilts for stilt dancers
These very light weight stilts, (only 6 lbs per pair, less shoes)
are designed, and intended for dance, for experienced stilts dancers.
(these are not toys for kids and I
prefer that they are not used by kids)
Sold Out.
No more available for now.
Don't know if or when I will make any more.
If I get a big enough request, then I might make another batch.
Click on Photos to see larger
photo. (more detail photos bellow)
These stilts were created by me after several participants in
the Aerial Festival In
Boulder Colorado 2002 expressed frustration in their
attempt to find STILTS to purchase.
Having come from a car racing, and Hang Gliding background along with extensive
rigging and fabrication in Flying trapeze eqpt.. I decided to use this knowledge
to construct
some stilts for a friend of mine using the Race car frame and Hang
Gliding frame technology.
These stilts are based on the basic design from the instructor at the aerial
festival
But using more sophisticated materials and construction techniques.
The steel body is Chrome-molly
(same as used to build the race car rollcage )
The aluminum poles are 6061 T6,
1 1/8", .058 or (thicker depending on length) aircraft aluminum.
(same as used
as main structure that holds hang gliders open.)
All welding was done by a certified aircraft frame welder and fabricator.
Note! I am not a business, and, as a hobby, occasional make misc. equipment
just to help fellow participants in the aerial and circus activities.
I do not
have a business facility, name, bank account or ability to
accept credit cards (
other than PayPal.com )
Please see disclaimer at bottom of this page.
The stilts are partially custom.
I need 2 measurements:
1. Bottom of kneecap to floor while
wearing the above shoes)
2. Height that you want the stilts to
be. 24", 36" , 48" (the higher stilt peg, the thicker the
aluminum tube wall thickness )
You also need to send shoes for mounting on the stilts.
These can be relatively inexpensive
shoes since you won't be
spending all that much time in
them. Tennis shoes work well for this, See shoe in photo.
The stilts have 1 inch in adjustment on measurement #1
(See more in Instruction Page)
Cost: $375/pair ,
includes 24" height pegs. plus $25
shipping & handling for continental US. UPS Ground
$385/pair
with 36" height pegs
( pegs require shipping in separate box, see add'l shipping price below)
$400/pair
with 48" height pegs
( pegs require shipping in separate box, see add'l shipping price below)
minimum
$150 deposit to order, money order or certified check,
PayPal
Payment of balance due is required before stilts will be shipped.
Spare pegs: $20 for 24" ( $9
shipping, if shipped separately from stilts. 1 or 2 pairs )
$30 for 36" ( $12
shipping, 1 or 2 pairs pegs )
$45 for 48" ( $15 shipping,
1 or 2 pairs pegs)
Spare Leg Strap: $20 ( $5
shipping, if shipped separately from a stilt order. No shipping if included in stilt or peg order )
The USER (you) , knowing the extreme nature of this endeavor, assumes all responsibility.
If the user is not
willing to assume the risks associated with this sport and activity
then perhaps
the user should not engage in the
activity and the use of this equipment,
and
should find a more benign activity to participate in.
If you have any
questions, write or please call.
ludwig @ Damnhot.com
303-880-0181
|
OR mail to:
Ludwig Goppenhammer
1808 19th St.
Golden, Co. 80401
Don't forget to send shoes.
303-880-0181-cell
STILTS Details
(See more in Instruction Page)
Since these are not mass produced, cost are higher than I would like them to be.
Main
body,
Upper pole bolted securely and has 3, 1/2" adjustment holes
with center hole being set at your measurement.
Lower height poles just plugs in and held tight with hose clamp.
Easy to switch from one height to another.
Knee brace, un-wrapped showing
loops for strap that secures stilt to leg.
padded and Wrapped
The stilts come with starter padding on the knee brace. Just
to get you started.
It is assumed that the user will further pad the knee brace to a fit that is
comfortable
and secure for their needs.
Please read the disclaimer below.
The user shall always inspect the stilts for usability.
watching for:
Signs of metal fatigue
Cracks in metal parts and welds
Check webbing for frays
Check Velcro to insure that it is
still a strong closure (not frayed hooks or loops)
Check for worn out or missing rubber
cap at bottom of stilt.
General usability inspection for
anything else that could be wearing out or damaged.
Warning, & Disclaimer
The activity of Stilts, aerial sports as trapeze, web, fabric,
hoop, any circus or
gymnastic activity etc. is a thrill seeking, daredevil type
of activity.
It is extremely hazardous
and should be approached with this in mind.
When doing these activities you are willfully risking life & limb.
The use of Stilts is a very dangerous activity that can result is serious injury and even death.
These stilts are
made with high quality material and care, but due to the constant bending,
twisting stresses that stilts go through, stilt components can and sometimes do
break.
It is the user's obligation to always inspect and determine that the stilts are
safe to use.
The manufacture can
not determine how the equipment
will be used, abused or miss-used, that can result in injury or equipment
failure.
Therefore:
The manufacturer takes no responsibility in:
The use of the stilts.
Or any activity associated with the stilts.
The manufacturer makes no warranties on, and takes no responsibility in construction and safety of stilts.
The USER (you) ,
knowing the extreme nature of this endeavor,
assumes all responsibility.
If the user is not
willing to assume the risks associated with this sport and activity
then perhaps
the user should not engage in the sport and the use of this equipment,
and
should find a more benign activity to participate in.
If you have any
questions, write or please call.
ludwig @ Damnhot.com
303-880-0181
